Hy-Grade Metal Products has been providing metal spun parts since 1918. Our experience and knowledge of the spinning process, combined with the use of CNC equipment, make us a leader in the industry.

This glare reducer assembly is used in the lighting industry. It is an easily mountable unit that limits glare from lighting units. Using 18 gauge 1100 aluminum, #8-32 aluminum threaded rod and #8-32 nuts with nylon inserts, these part were sheared, circled, spun, machined and assembled to tolerances of +/-.010”.

These glare reducers are made from three rings of approximately 6”, 4” and 2” diameter. Each ring is 1.00” in height. After the rings are fabricated, they are assembled with four tabs using threaded rod and nuts. Parts are visually and dimensionally inspected during the process to insure a consistent finish and the rings are to spec. We will typically provide 100-200 of these items per run. Lead times are within 4 weeks.

You can find out more information on these glare reducer assemblies below or you may contact Hy-Grade Metal by phone (315-475-4221) or email us.

Request Information

glare-reducer-assembly Glare-Reducer-Assembly-drawing

Glare Reducer Assembly Fabrication Properties and Highlights

Product Name
Concentric Ring Glare Reducer Assembly
Product Description
Used to limit glare from lighting units
Industry of Use
Lighting Industry
Capabilities / Processes
Primary:
Shearing
Circle/Rotary Shearing
CNC Spinning
CNC Turning Center
Secondary:
Deburring
Assembly
Equipment Used for Manufacture
Shear
Circle/Rotary Shear
CNC Spinning Lathe
CNC Turning Center
Material Used for Manufacture
18 gauge 1100 Aluminum
#8-32 all thread Aluminum Rod
#8-32 Nut with nylon insert   
Overall Dimensions
Large Ring — 5.992" O.D.
Medium Ring — 3.906" O.D.
Small Ring — 1.812" O.D. 
Height of each ring is 1.000"
Overall height of 1.620 (including tabs) 
Tightest Tolerances
+/- .010"
Finish
Raw Spun Finish
Powder coat – Black
In Process Testing / Inspection Perfomed
Material inspection/Gauge inspection
Dimensional inspection
Visual inspection
Volume
Typically 100 – 200 pieces per run
Turnaround Time
4 weeks to make tooling and order quantity
Parts are complete and ready for ship when needed at 25 per month
Delivery Location
Camillus, NY – U.S.A
Standards Met
Per Customers Specifications